Fishing net supplier — cast, gill, landing and fyke nets from Weihai

The water decides the net, not the catalogue

Net selection starts with the use case and water, then moves to mesh, twine and construction. A cast net, gill net, landing net and fyke net solve different handling problems. A product that looks similar in a photograph can have a different geometry, reinforcement or pack-out. Treat the following as a sourcing map and an example of the questions to ask, not as a fishing method or legal recommendation.

Geographic and species examples are only suitability prompts. Target species, closed seasons, mesh restrictions and permitted gear vary by jurisdiction; confirm them with the responsible authority before placing an order.

Mesh, twine and material define the working net

Mesh size must be stated with its measurement convention. Some buyers use stretched knot-to-knot, while others use bar length or a local trade convention. Put the convention, unit and tolerance in the brief. For cast nets, also state whether the quoted dimension is radius or diameter. Those words can produce a net half the expected size if they are left implicit.

Twine size, often expressed with denier or a numbered twine scale, affects visibility, handling, abrasion resistance and material use. Nylon monofilament and multifilament, PE and coated variants behave differently in stretch, stiffness and UV exposure. Nylon may be preferred for a particular handling profile; PE may be selected for low stretch or strength-to-weight goals. Ask the factory to name the actual material and treatment rather than relying on a colour or product nickname.

• Mesh size and measurement convention.
• Twine material, construction and stated size.
• Untreated, UV-stabilised, dyed or tarred finish.
• Colour, knot type, mesh depth and reinforcement.
• Destination water and exposure assumptions, where relevant.

Dimensional fields prevent a net quote from drifting

For a cast net, state radius or diameter, mesh size, weight distribution, hand line, swivel and any centre line requirements. For a gill or fyke net, state panel length, depth, number of meshes deep, selvedge, reinforcement and the float and sinker line arrangement. For a landing net, state frame shape, opening, bag depth, handle length, joint, thread or screw fitting and the intended pack length.

Packaging belongs in the same brief. A retail header card, individual bag, bulk bundle or shipping carton changes the pack-out and the available loading space. Add the first order quantity, annual estimate, destination country and artwork requirements. A factory should mark any dimension it inferred from a sample.

Construction and treatment should be visible in the quote

Knotted and knotless nets can suit different handling, repair and production requirements. Do not treat one as universally better. Ask how the mesh is formed, where the load is reinforced and whether the sample and production use the same method. For a landing net, the bag is only one part of the product: the frame, handle connection and locking mechanism deserve their own checks.

UV stabilisation, dyeing and tarring are batch treatments that can change handling, appearance and expected exposure performance. We do not publish a season-life guarantee. If sunlight or salt exposure matters, request the treatment specification and agree a test or inspection method with the factory. Record the treatment on the approval sample and production paperwork so it cannot disappear between quote and shipment.

• Confirm knotless or knotted construction and the mesh convention.
• Identify selvedge, edge rope, seams and load-bearing reinforcement.
• List frame, handle, joint and hardware material for landing nets.
• State coating, dye, tar or UV treatment and the evidence available.

What moves the cost of a fishing net

Net pricing depends on material, area, construction and pack-out. Fine mesh combined with heavier twine uses more material; a large panel may be cheaper per unit but more expensive to pack and ship. Hardware can dominate a landing-net quote. A treated or retail-ready net includes processing and packaging work that a bulk bundle does not.

1. Mesh and twine: state both together, including measurement convention and material.
2. Construction: knot type, seams, selvedge and reinforcement affect labour and repeatability.
3. Frame and hardware: landing-net materials, telescopic parts and fittings add separate checks.
4. Treatment: dye, tar and UV stabilisation are added process steps.
5. Packaging: header cards, bags, cartons and labels change pack-out and freight planning.
6. Volume: first order, repeat order and season planning should be quoted separately.

We do not publish a price per net because mesh, twine, material, dimensions and volume can move it in different directions. Ask for two or three quotes under identical assumptions and record what each quote leaves Not confirmed.

Sampling and inspection on a net order

A photograph cannot confirm mesh or twine. During spec review, convert all units and label the measurement convention. Shortlist factories whose machines and construction fit the request. On the sample, lay the net out, measure mesh with an agreed gauge, confirm dimensions, inspect knots or seams and check hardware. Keep a record of the approved sample.

1. Check mesh, twine, material, dimensions and construction are defined in one brief.
2. Ask factories to identify machinery, treatment and material evidence.
3. Measure the sample rather than accepting a photograph or verbal description.
4. Approve changes before a repeat run or tooling decision.
5. Set in-process checks for mesh, twine and edge or frame construction.
6. Inspect a defined production sample before shipment, including packaging and marks.

Where local rules affect gear, use the destination market's approved specification and retain the supporting guidance. This page does not decide whether a net is legal for a particular fishery.

Quality questions for a net supplier

Ask what the factory can show, not only what it can say. A useful file may include material identification, mesh measurements, twine records, treatment batch, dimensions, hardware checks, packaging photographs and non-conformance handling. The exact record varies by factory; mark each field Confirmed, Claimed or Not confirmed.

• Which material and twine construction are used in the sample and production run?
• How is mesh measured, and what tolerance is recorded?
• How are knots, selvedges, seams, floats, sinkers and frame joints inspected?
• Can the factory show a dated sample record or host a third-party inspection?
• How are treatment and colour matched between sample and production?
• What packaging and shipping-mark checks are completed before loading?

Use the verification standard to keep factory identity, capacity, MOQ and lead time separate from a product description. When ready, send a net RFQ with the water, market and pack-out context.

Common gaps on net orders

The most expensive misunderstandings are small words in a brief. A mesh number without a convention cannot be compared. A cast-net radius without the word radius changes the size. A sample without treatment evidence cannot support an outdoor performance assumption. A net priced without packaging can look cheap until the shipping plan is built.

• Quoting stretched knot-to-knot and bar length as if they were the same.
• Using radius and diameter interchangeably for a cast net.
• Ordering an untreated sample while expecting a treated production run.
• Ignoring loading space and retail packaging for bulky, low-value goods.
• Choosing by unit price while leaving twine, reinforcement or hardware unspecified.
• Assuming an example species or geography decides suitability or legal use.

Write down the intended use, but ask the factory to quote the measurable construction. That keeps an example scenario from becoming an unverified product claim.

What is confirmed for this product line

The public scope is cast, gill, landing and fyke nets, with nylon and PE and custom mesh and dimensions as possible brief fields. Mesh range, twine range, treatment availability, MOQ, capacity, lead time, factory identity and destination suitability are Not confirmed until checked against a dated factory record and your specification.

Send the net type, measurement convention, material, dimensions, treatment, packaging, quantity and destination in the RFQ form. We can return clarifying questions or comparable quotes where the evidence supports them. See the verification standard before treating a supplier statement as a checked fact.

Confirm local fishing rules and species restrictions independently. The sourcing brief can describe a product; it cannot grant permission to use that gear in a particular water.